-
Details
The JVL MAC00-EC4 EtherCAT expansion module Maximizes the use of 100Mbit, full duplex Ethernet bandwidth. The MAC00-E4 overcomes typical Ethernet overhead by employing "on the fly" processing hardware. The MAC00-EC4 expansion module can be used in the following JVL servo products: MAC50, MAC095, MAC140, MAC141, MAC400, MAC402, MAC800, MAC1500 and MAC3000.
EtherCAT® is a Real Time Ethernet technology which aims to maximize the use of the 100 Mbit, full duplex Ethernet bandwidth. It overcomes the overhead normally associat-ed with Ethernet by employing "on the fly" processing hardware. An EtherCAT® net consists of a master system and up to 65535 agent devices, connect-ed together with standard Ethernet cabling.
The agent devices process the incoming Ethernet frames directly, extract or insert rele-vant data and transfer the frame to the next agent device, with a delay of approx. 4μs. The last agent device in the bus segment sends the processed frame back, so that it is re-turned by the first agent to the master as a kind of response frame.
There are several protocols that can be used as the application layer. In the CANopen over EtherCAT® (CoE) technology, the CANopen protocol is applied to EtherCAT®. CANopen defines Service Data Objects (SDO), Process Data Objects (PDO) and the Object Dictionary structure to manage the parameters. Further information about Eth-erCAT®, is available from the EtherCAT® technology group http://www.ethercat.org
-
Additional Information
Part Number MAC00-EC4 Brand JVL Industri Elektonik A/S Pack Size 1.0000 UOM EA Lead time (Historical if not in stock) 37.000000000 Lead Days Product Type Motor IP Rating IP67 -
Reviews
Write Your Own Review
You have no items to compare.
