Call Us Now: (800) 222-2903
0
You have no items in your shopping cart.

0

 

Items 1 to 10 of 13 total

Page:
  1. 1
  2. 2

Life Sciences and Automation

Thursday, March 26, 2020 3:58:32 PM America/New_York

Precise Automation and Life Sciences AutomationAs our population grows older, it requires more healthcare resources.  As a result, the medical field must adapt to be able to provide the resources in a timely method.   Waiting long periods to get test results back or develop new remedies isn’t good policy for family members waiting for and wanting solutions.

As of today, people that are 60 and older require three-to-five times the healthcare services that younger generations require.  As this segment of our population grows and requires more of our healthcare resources, the volume of clinical and diagnostic testing is increasing exponentially and placing new demands on laboratories to deliver quick test results and new drugs to fight current and new illnesses.

Read More
Posted in Robots By Marketing

Do you think you can stump Dr. Vacuum?

Thursday, February 27, 2020 12:01:34 PM America/New_York

Meet Bimba's Dr. VacuumJim Watters (Dr. Vacuum) from Bimba Manufacturing will be visiting Scott Equipment Company on March 17, 18 and 19, 2020.  He will be riding along with our Account Managers and we wanted to give you an opportunity to schedule an appointment to meet Dr. Vaccuum.

Read More
Posted in Pneumatics By Marketing

Datalogic Laser Sentinel - Safety Area Scanner

Monday, February 3, 2020 12:19:32 PM America/New_York

Datalogic Laser Sentinel Area Scanner Available from Scott Equipment CompanySafety is everyone's number one goal.  Safety scanners prevent hazards from operating when an unintended object or person is in a dangerous area.  These safety devices can be unobtrusively mounted to avoid damage or potential impact, while protecting a simple or complex shaped area.

The Datalogic Laser Sentinel aids in providing area safety by scanning up to 40 meters.  This enables the Datalogic Laser Sentinel to be programmed to your specific safety needs.

Read More
Posted in Electronics By Marketing

Datalogic - 5 Reasons Why Traceability has a Positive ROI

Thursday, December 12, 2019 4:43:39 PM America/New_York

Datalogic LogoIn the first quarter of 2018, there were 72 consumer product recalls in the United States, more than five per week. Recalls are costly in time, money and brand reputation. While every manufacturer takes steps to avoid product recalls, they happen.

Read More
Posted in Electronics By Marketing

Datalogic Traceability - Why do you need it?

Monday, December 9, 2019 11:45:40 AM America/New_York

Datalogic LogoWith Datalogic’s identification devices, vision systems and sensors your operations can be assured that every movement of a component is accurately tracked and traced and that you have visibility as to where it is going and who is handling it. Discover the latest innovative products that help make it happen.

Read More
Posted in Electronics By Marketing

Creating Efficiency: Murrelektronik Modlink MSDD Front Panel Interfaces

Wednesday, December 4, 2019 11:58:28 AM America/New_York

Are you looking for a solution to increase the efficiency of your on-site diagnostics and maintenance?   One of the biggestMurrelektronik Logo issues floor managers communicate to us while visiting their facilities is limited access to a machine’s control panel.  In a lot of instances, the control panels are locked and require special access by either an approved operator or require additional physical security provided prior to opening the panel for safety reasons.   Murrelektronik’s Modlink MSDD front panel interfaces allow an operator to access the interface devices inside the closed control panel while remaining in compliance with the company’s safety regulations regarding panel entry.

Read More
Posted in Electronics By Marketing

Floating Magnets vs Sliding Captive Magnets on Transducers

Wednesday, October 16, 2019 4:56:10 PM America/New_York

Captive Magnet MTS Transducer available from Scott Equipment CompanyMagnetostrictive linear transducers are feedback sensors that give an analog or digital signal relative to the position of a magnet along the waveguide.  One of the common questions we are asked is should I use a captive or floating magnet?  The answer depends on the application and the environment.

Read More
Posted in Electronics By Marketing

Scott Equipment Company Cv Calculator for Valve Sizing

Wednesday, August 28, 2019 4:57:44 PM America/New_York

Scott Equipment Company Cv CalculatorA flash based pneumatic valve sizing calculator has been posted under the links section of our website.  This sizing calculator allows you to determine your valve Cv requirement.  Enter your application requirements and the calculator will give you everything you need to determine the correct valve requirement for your application including Cv, cylinder velocity, flow required, extend force, and retract force.  By design, you can easily tweak values to see what changes in variables do to your application requirements.

Click Here to use the calculator!

Read More
Posted in Pneumatics By Marketing

SMC Best Practices - Remove Water from Factory Air and Minimize Costly Downtime

Wednesday, August 28, 2019 4:40:18 PM America/New_York

SMC LogoOne of the foremost causes of costly downtime and emergency maintenance is not oil or contaminants, which are easily removed with proper filtration, but water vapor and the resulting condensed water that is trapped in factory compressed air.

Water in facility airlines can cause corrosion, rust and pipe scale which can break loose to block or adhere to air passageways that can lead to increased pressure drop and loss in machine performance.
Read More
Posted in Pneumatics By Marketing

Solving Repetitive Tasks with Collaborative Robots

Thursday, May 2, 2019 4:00:37 PM America/New_York

Aubo i5 Collaborative RobotA question Scott Equipment Company (SEC) gets asked on a somewhat regular basis is, can a collaborative robot, like the Aubo i5 SEC sells, handle a screw application. For example, installing screws into a housing on an assembled part. It is an interesting idea and one that has not made it past the idea phase for SEC. SEC found a video from Aubo Robotics showing exactly that. The solution was to mount a normal powered screw driver to custom end of arm tooling on the Aubo Robot, pick up a screw from a bowl feeder, place the screw in the assembly and have the powered screwdriver 'drive' the screw.

Read More
Posted in Robots By Marketing

Items 1 to 10 of 13 total

Page:
  1. 1
  2. 2