Pneumatic Valves
-
$148.50Stock: 0.000000000
NGT check valves allow you to lock your pneumatic device in position when a pressure drop or total loss of pressure occurs. Manual release for exhausting trapped air before maintaining the system (OSHA Requirement). Learn MoreProduct Code:- B810M
-
$161.00Stock: 0.000000000
In the event of a pressure loss, the NGT D6C00 manual release dual check valve maintains cylinder position by locking air in both cylinder ports. This solution eliminates drift due to leaky spool valves. Learn MoreProduct Code:- D6C00
-
$174.00Stock: 0.000000000
In the event of a pressure loss, the NGT D6C0M manual release dual check valve maintains cylinder position by locking air in both cylinder ports. This solution eliminates drift due to leaky spool valves. Learn MoreProduct Code:- D6C0M
-
$166.00Stock: 0.000000000
In the event of a pressure loss, the NGT D6C0MFL manual release dual check valve maintains cylinder position by locking air in both cylinder ports. The internal flow controls meter air out of the cylinder. A manual release is available to release trapped air from both ports independently. Learn MoreProduct Code:- D6C0MFL
-
$161.00Stock: 0.000000000
In the event of a pressure loss, the NGT D8C00 manual release dual check valve maintains cylinder position by locking air in both cylinder ports. This solution eliminates drift due to leaky spool valves. Learn MoreProduct Code:- D8C00
-
$9.30Stock: 0.000000000
AAA DIN caps are not supplied with standard solenoid valves. These caps must be ordered separately. There are several styles of DIN caps. When ordering LED indicator types, you must specify voltage of solenoid coil. LED indicator type caps are equipped with VDR (voltage dependent resistor) surge protection. Learn MoreProduct Code:- DCGL-24
-
$67.70Stock: 0.000000000
SMC VM800 3 Port Mechanical Valve, Roller Lever Actuator, G1/8 Ports Learn MoreProduct Code:- EVM830-F01-01
-
$47.91 As low as: $34.97Stock: 0.000000000
Flairline right angle flow controls incorporate O-Check as the bypass valve. RFC permits full free flow in one direction, accurately metered flow in opposite direction. Standard metering needle design includes compound needle taper of 5• and 15• and fine adjustment stem threads (RFC 1/4 for example is 1/4”- 36). Learn MoreProduct Code:- RFC-1/2
-
$29.49 As low as: $21.53Stock: 4.000000000
Flairline right angle flow controls incorporate O-Check as the bypass valve. RFC permits full free flow in one direction, accurately metered flow in opposite direction. Standard metering needle design includes compound needle taper of 5• and 15• and fine adjustment stem threads (RFC 1/4 for example is 1/4”- 36). Learn MoreProduct Code:- RFC-1/8
-
$21.40 As low as: $15.62Stock: 0.000000000
Flairline right angle flow controls incorporate O-Check as the bypass valve. RFC permits full free flow in one direction, accurately metered flow in opposite direction. Standard metering needle design includes compound needle taper of 5• and 15• and fine adjustment stem threads (RFC 1/4 for example is 1/4”- 36). Right angle design eliminates the need for pipe ell normally used to make 90• turn at cylinder port. Standard NPTF sizes 1/8”, 1/4”, 3/8”, 1/2” and 3/4”. Adjustment knobs and panel mounting available (NPTF sizes 1/8”, 1/4” and 3/8” only). Optional swivel connector allows “direct” cylinder mounting and 360• rotation for ease of installation and space saving (NPTF sizes 1/8”, 1/4”, 3/8”, and 1/2” only).
Learn MoreProduct Code:- RFC-1/8-K
