Pneumatic Valves
-
$148.50Stock: 0.000000000
NGT check valves allow you to lock your pneumatic device in position when a pressure drop or total loss of pressure occurs. Manual release for exhausting trapped air before maintaining the system (OSHA Requirement). Learn MoreProduct Code:- B810M
-
$161.00Stock: 0
In the event of a pressure loss, the NGT D6C00 manual release dual check valve maintains cylinder position by locking air in both cylinder ports. This solution eliminates drift due to leaky spool valves. Learn MoreProduct Code:- D6C00
-
$174.00Stock: 0
In the event of a pressure loss, the NGT D6C0M manual release dual check valve maintains cylinder position by locking air in both cylinder ports. This solution eliminates drift due to leaky spool valves. Learn MoreProduct Code:- D6C0M
-
$172.50Stock: 0
This NGT dual pneumatic valve is used to reduce jerky motion in pneumatic systems. Back pressure is constantly applied to the air cylinder piston in order to prevent a runaway condition, where the cylinder will take off quickly and then stop when the back pressure builds up enough pressure to stop cylinder movement. Learn MoreProduct Code:- D6C0MC
-
$166.00Stock: 0
In the event of a pressure loss, the NGT D6C0MFL manual release dual check valve maintains cylinder position by locking air in both cylinder ports. The internal flow controls meter air out of the cylinder. A manual release is available to release trapped air from both ports independently. Learn MoreProduct Code:- D6C0MFL
-
$161.00Stock: 0
In the event of a pressure loss, the NGT D8C00 manual release dual check valve maintains cylinder position by locking air in both cylinder ports. This solution eliminates drift due to leaky spool valves. Learn MoreProduct Code:- D8C00
-
$47.91 As low as: $34.97Stock: 0
Flairline right angle flow controls incorporate O-Check as the bypass valve. RFC permits full free flow in one direction, accurately metered flow in opposite direction. Standard metering needle design includes compound needle taper of 5• and 15• and fine adjustment stem threads (RFC 1/4 for example is 1/4”- 36). Learn MoreProduct Code:- RFC-1/2
-
$29.49 As low as: $21.53Stock: 0
Flairline right angle flow controls incorporate O-Check as the bypass valve. RFC permits full free flow in one direction, accurately metered flow in opposite direction. Standard metering needle design includes compound needle taper of 5• and 15• and fine adjustment stem threads (RFC 1/4 for example is 1/4”- 36). Learn MoreProduct Code:- RFC-1/8
-
$21.40 As low as: $15.62Stock: 0
Flairline right angle flow controls incorporate O-Check as the bypass valve. RFC permits full free flow in one direction, accurately metered flow in opposite direction. Standard metering needle design includes compound needle taper of 5• and 15• and fine adjustment stem threads (RFC 1/4 for example is 1/4”- 36). Right angle design eliminates the need for pipe ell normally used to make 90• turn at cylinder port. Standard NPTF sizes 1/8”, 1/4”, 3/8”, 1/2” and 3/4”. Adjustment knobs and panel mounting available (NPTF sizes 1/8”, 1/4” and 3/8” only). Optional swivel connector allows “direct” cylinder mounting and 360• rotation for ease of installation and space saving (NPTF sizes 1/8”, 1/4”, 3/8”, and 1/2” only).
Learn MoreProduct Code:- RFC-1/8-K
-
$31.55 As low as: $23.03Stock: 0
Flairline right angle flow controls incorporate O-Check as the bypass valve. RFC permits full free flow in one direction, accurately metered flow in opposite direction. Standard metering needle design includes compound needle taper of 5• and 15• and fine adjustment stem threads (RFC 1/4 for example is 1/4”- 36). Learn MoreProduct Code:- RFC-3/8
