-
Details
JVL process control modules are intended to be used for control application requiring an analogue 4-20mA interface to a controller. The interface consists of a 4-20mA input to control the motor position and a 4-20mA output to indicate the actual position. JVL process control modules offer full galvanic isolation from other electrical circuitry inside the motor and also in between. An output is also available to indicate if any error has occurred that prevent the motor from doing the intended operation. This output is also galvanic isolated. If a second motor needs to function as an agent, the MAC00-P4/P5 modules also offer this possibility. A high speed communication interface makes it possible to handle a secondary motor configured as "agent" which means that the communication protocol always makes sure that the agent follows the controller motor. In case of an error in either the agent or controller any further motion is stopped in both motors.
- Standard M12 and Harting connectors (MAC00-P5) for optimum reliabilty.
- Standard M12 connectors (MAC00-P4)
- 4-20mA analogue input. Resolution 16 bit (65535 steps). Galvanically isolated.
- 4-20mA analogue output. Resolution 16 bit (65535 steps). Galvanically isolated.
- Error output. Galvancially isolated.
- Communciation interface to agent motor (includes +24V poer to the agent motor).
- Optically isolated communcation covering RS232/RS485.
- Full RS232 protocol support for use with standard serial cable.
- RS232 Communication interface to a PC for setup and monitoring use.
- Supply input fo the control section in the motor. It is also used to the agent motor if present.
-
Additional Information
Part Number MAC00-P4 Brand JVL Industri Elektonik A/S Pack Size 1.0000 UOM EA Lead time (Historical if not in stock) 0 Lead Days Product Type Motor -
Reviews
Write Your Own Review
You have no items to compare.
