Pneumatics
Pneumatics is a branch of engineering that makes use of gas or pressurized air. Pneumatic systems used in industry are commonly powered by compressed air or compressed inert gases. A centrally located and electrically powered compressor powers cylinders, air motors, and other pneumatic devices
-
$26.55Stock: 0
SMC AS In-line Flow Control, for 8mm OD Tube, with Round Lock Nut Learn MoreProduct Code:- AS3002F-08-J
-
$3.12Stock: 0
The SMC KQ2H08-00A one-touch fitting is a straight union, different diameter fitting designed for tubing with an 8mm O.D. The KQ2H08-00A has a resin body. Learn MoreProduct Code:- KQ2H08-00A
-
$2.18Stock: 0
The SMC KQ2H08-01AS One-touch fitting is a male connector type fitting for 8mm OD tubing with a R1/8 port size. The KQ2H08-01AS fitting has brass threads. Learn MoreProduct Code:- KQ2H08-01AS
-
$2.71Stock: 0
The SMC KQ2H08-02AS One-touch fitting is a male connector type fitting for 8mm OD tubing with a R1/4 port size. The KQ2H08-02AS fitting has brass threads. Learn MoreProduct Code:- KQ2H08-02AS
-
-
$3.93Stock: 0
SMC KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The use of a special profile seal allows the KQ2 to be used for a wide range of pressures from a low vacuum up to a pressure of 1MPa. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing.
Learn MoreProduct Code:- KQ2H08-10A
-
-
-
-
$62.95Stock: 0
SMC Series 10-TU tubing is a high quality, flexible, polyurethane tubing available for clean environments, with a particle generation of grade 1. The minimum bending radius (value at which the tubing will fold at a temperature of 20 °C) ranges from 10mm to 35mm, depending on the model selected. Learn MoreProduct Code:- 10-TU0805BU-20
