Pneumatics
Pneumatics is a branch of engineering that makes use of gas or pressurized air. Pneumatic systems used in industry are commonly powered by compressed air or compressed inert gases. A centrally located and electrically powered compressor powers cylinders, air motors, and other pneumatic devices
-
$10.10Stock: 0.000000000
SMC AS Flow Control Elbow, Meter-Out, 1/8" NPT to 1/4" OD Tube Learn MoreProduct Code:- NAS2201F-N01-07S
-
$2.18Stock: 3067.000000000
SMC KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The use of a special profile seal allows the KQ2 to be used for a wide range of pressures from a low vacuum up to a pressure of 1MPa.
Learn MoreProduct Code:- KQ2H07-34AS
-
$24.95Stock: 0.000000000
The Bimba FQPS12K miniature flow control has a NPT 1/8" port and uses 1/4" OD tube. The needle can be adjusted via a knurled knob with screwdriver slot and has a max operating pressure of 150 PSI and can operate in temperatures between 30 degrees to 140 degrees Fahrenheit. Learn MoreProduct Code:- FQPS21K
-
$27.38Stock: 10.000000000
The Bimba FQPS2 miniature flow control has a 1/8" NPT Port and uses 1/4" OD tube. The needle can be adjusted via a recessed screwdriver slot and has a max operating pressure of 150 PSI and can operate in temperatures between 30 degrees to 140 degrees Fahrenheit. Learn MoreProduct Code:- FQPS2
-
$10.95Stock: 0.000000000
SMC AS Flow Control Elbow, Meter-In, 1/8" NPT to 1/4" OD Tube Learn MoreProduct Code:- AS2211F-N01-07S
-
$10.95Stock: 90.000000000
The SMC AS2201F-N01-07S one-touch fitting speed controller is a elbow type fitting. This speed controller is a meter-out fitting with a NPT 1/8" port size and uses 1/4" tubing. Learn MoreProduct Code:- AS2201F-N01-07S
