Pneumatics
Pneumatics is a branch of engineering that makes use of gas or pressurized air. Pneumatic systems used in industry are commonly powered by compressed air or compressed inert gases. A centrally located and electrically powered compressor powers cylinders, air motors, and other pneumatic devices
-
$12.55Stock: 0.000000000
The SMC AS2210-02-S-J is an elbow style, meter-in speed controller with a 1/8, 1/4 Basis size and uses an Rc thread. The AS2210-02-S-J has a 1/4" port size and includes a round lock nut and sealant. Learn MoreProduct Code:- AS2210-02-S-J
-
$151.85Stock: 0.000000000
CP96, profile tube design ISO cylinder with enclosed tie rods, is available in 6 bore sizes from ø32 to ø125mm. The series is available with a single or double rod in 6 bore sizes from ø32 to ø125mm. Learn MoreProduct Code:- CP96SDB40-300C
-
$25.54Stock: 43.000000000
The Bimba FCP2 flow control has a 1/8" NPT port size and the needle adjustment is recessed with a screwdriver slot. The Bimba FCP2 flow control has a max operating pressure of 150 PSI and has an operating temperature range of -20° to +200° F (-25° C to +95° C). Learn MoreProduct Code:- FCP2
-
$37.77Stock: 38.000000000
Bimba Port mounted flow controls are ideal for adjusting the speed of extension and retraction for virtually any actuator. Most double acting applications are best served with meter-out style flow controls, which control the flow of exhaust air as it leaves the cylinder. By reducing the exhaust air flow rate, the flow control reduces the speed of travel of the cylinder rod. Learn MoreProduct Code:- FQP4
-
$6.45Stock: 0.000000000
SMC KK S Coupler Plug, 0 to 1.0 Mpa Operating Pressure, 1/4" OD One Touch Fitting Connection. Learn MoreProduct Code:- KK130P-07H
