MAC Motor Expansion Module for MAC 50 to MAC 3000
-
$1,179.06
Stock: 0
The JVL MAC00-Ex4/-Ex41 (Ethernet module for MAC motors) and MIS/MILxxxxxxExxxxxx (MIS/MIL motors with Ethernet option) can be config-ured by the end user to a number of different Ethernet protocols. Learn MoreProduct Code:- MAC00-EI41
-
-
$857.22
Stock: 0
The JVL MAC00-EM4 Modbus expansion module allows user to communicate to the motor over TCP/IP networks by connecting over port 502. The JVL implementation also supports Modbus UDP which is faster but with no connection control. Learn MoreProduct Code:- MAC00-EM4
-
$857.22
Stock: 0
The JVL MAC00-EP4 PROFINET expansion module has 8 pin connectors for I/O and can be controlled and set up via PROFINET. Learn MoreProduct Code:- MAC00-EP4
-
$758.36
Stock: 0
The JVL MAC00-ES4 SERCOS expansion module is equipped with two Ethernet connectors and a built-in switch, enabling line and ring topology without any extra expensive hardware.The MAC00-ES4 has several LEDs, enabling technicians and operators to get a quick status overview. Learn MoreProduct Code:- MAC00-ES4
-
-
-
-
$883.21
Stock: 0
The MAC00-FC4 CANopen expansion module enables the MAC motors to be used on a CANopen or CANbus network. The MAC00-FC4 module is supplied with IP67 M12 connectors for use in industrial environments. Learn MoreProduct Code:- MAC00-FC4
-