JVL Servo and Stepper Motors with Drives
JVL Servo and Stepper Motors with Drives
-
-
-
-
-
$333.25Stock: 6.000000000
JVL MacTalk® is the universal software from JVL for all integrated motor series: MAC motor®, ServoStep® and QuickStep®. JVL MacTalk is used for setup, monitoring and diagnostics in real time - and for ePLC program development, where the PLC program is embedded and runs locally in the motor. Learn MoreProduct Code:- MACTALK_OEMUSB
-
$4,354.32Stock: 0.000000000
The JVL MAC800-D5 Integrated Servo Motor is a 750W (1.00hp) motor. The MAC800-D5 has a peak torque of 6.8Nm and weighs 4.3kg (9.48lb). The speed range for the MAC800-D5 is 0-3000RPM with full torque and a maximum of 3500RPM.
Learn MoreProduct Code:- MAC800-D5
-
$3,719.49Stock: 1.000000000
The JVL MAC800-D2 Integrated Servo Motor is a 750W (1.00hp) motor. The MAC800-D2 has a peak torque of 6.8Nm and weighs 3.5kg (7.72lb). The speed range for the MAC800-D2 is 0-3000RPM with full torque and a maximum of 3500RPM. Learn MoreProduct Code:- MAC800-D2
-
$3,326.94Stock: 0.000000000
The JVL MAC400-D2-CAGM Integrated Servo Motor is a 400W (0.54hp) motor. The MAC400-D2 has a peak torque of 3.8Nm and weighs 2.3kg (5.11lb). The speed range for the MAC400-D2 is 0-3000RPM with full torque and a maximum of 3500RPM. This motor comes with the following options: C: Incremental encoder 8192; A: Standard square flange G: Black thick painting (IP42/IP55); M: MAC400 14mm key 5x20mm Learn MoreProduct Code:- MAC400-D2-CAGM
-
$99.76
Stock: 0.000000000
JVL Power Connector Kit M16 Angled Learn MoreProduct Code:- MAC400-CONKIT2-PWR
-
$82.31
Stock: 2.000000000
JVL Power Connector Kit M16 Straight Learn MoreProduct Code:- MAC400-CONKIT1-PWR
