Servo Drives & Motors
Servo Drives & Motors
-
$1,263.04Stock: 0.000000000
The JVL MAC095-A1 is a generation 1, integrated servo motor that has a rated output of 92W. The MAC095-A1 is an AC-brushless servo motor with a maximum 4000 rpm and has an IP42 protection rating. Learn MoreProduct Code:- MAC095-A1
-
$1,134.60Stock: 0.000000000
The JVL MAC050-A1 is a generation 1, integrated servo motor that has a rated output of 46W. The MAC050-A1 is an AC-brushless servo motor with a maximum 4000 rpm and has an IP42 protection rating. Learn MoreProduct Code:- MAC050-A1
-
$821.83Stock: 0.000000000
The JVL MAC00-P5 process control expansion module has Harting connectors. The MAC00-P4 module is intended to be used for control application requiring an analogue 4-20mA interface to a master controller. Learn MoreProduct Code:- MAC00-P5
-
$753.54Stock: 0.000000000
The JVL MAC00-P4 process control expansion module has standard M12 connectors. The MAC00-P4 module is intended to be used for control application requiring an analogue 4-20mA interface to a master controller. Learn MoreProduct Code:- MAC00-P4
-
$813.47Stock: 0.000000000
The JVL MAC00-FP4 is a Profibus DP agent module with a baudrate up to 12Mbit. The MAC00-FP4 has isolated I/O available for high speed start/stop, end limit and a Zero search function. This module has M12 connectors for use in harsh environments. Learn MoreProduct Code:- MAC00-FP4
-
$883.21Stock: 1.000000000
The MAC00-FC4 CANopen expansion module enables the MAC motors to be used on a CANopen or CANbus network. The MAC00-FC4 module is supplied with IP67 M12 connectors for use in industrial environments. Learn MoreProduct Code:- MAC00-FC4
-
$758.36Stock: 0.000000000
The JVL MAC00-ES4 SERCOS expansion module is equipped with two Ethernet connectors and a built-in switch, enabling line and ring topology without any extra expensive hardware.The MAC00-ES4 has several LEDs, enabling technicians and operators to get a quick status overview. Learn MoreProduct Code:- MAC00-ES4
-
$857.22Stock: 0.000000000
The JVL MAC00-EP4 PROFINET expansion module has 8 pin connectors for I/O and can be controlled and set up via PROFINET. Learn MoreProduct Code:- MAC00-EP4
-
$857.22Stock: 0.000000000
The JVL MAC00-EM4 Modbus expansion module allows user to communicate to the motor over TCP/IP networks by connecting over port 502. The JVL implementation also supports Modbus UDP which is faster but with no connection control. Learn MoreProduct Code:- MAC00-EM4
-
$1,179.06Stock: 0.000000000
The JVL MAC00-Ex4/-Ex41 (Ethernet module for MAC motors) and MIS/MILxxxxxxExxxxxx (MIS/MIL motors with Ethernet option) can be config-ured by the end user to a number of different Ethernet protocols. Learn MoreProduct Code:- MAC00-EI41
