MAC00-FP4 JVL Profibus-DP Expansion Module

The MAC00-FP2 and MAC00-FP4 modules for the JVL integrated servo motors are Profibus DP agent modules with baudrates up to 12Mbit. All registers of the MACmotor can be read and written these modules. Isolated IO are available for high speed start/stop, end limit and Zero search function. Addresses can be set up via software or with DIP switch. These modules have M2 connector for use in harsh environments and BUS IN and BUS OUT for easy implementation of bus systems GSD file and and program example for Siemens S7 are available for download.
          

All the registers of the MAC motor can be read and written. These modules include 6 inputs, 2 of which are end-limit inputs. These can be read from the Profibus-DP. The end-limit inputs can automatically halt the motor. The other inputs can be used to activate different movements.The MAC motor is controlled by writing to the input data (9 bytes).The expansion modules MAC00-FP2 and FP4 can be mounted on stan-dard MAC motors MAC050, MAC095, MAC140, MAC141, MAC400 and MAC800.

Module Specifications:

• Control and setup through 12Mbit/s Profibus-DP
• Logic I/O's for High speed start/stop
• In position indication
• Home switch
• IP67 Protection
• RS232/RS485 interface
• M12 connector or cable glands
• MAC00-FP-05 solution iwth 5m power and I/O cable and 2pcs Profibus connectors.

Both modules offer the same functions but with the hardware differences shown in table:

Note*:  IP65 with MAC400 and MAC800