MAC00-FC4 JVL CANopen Expansion Module
Sku#: MAC00-FC4
The modular construction of JVL's MAC050-141 and MAC800 series of integrated MAC motors makes them well suited for a large number of fieldbus applications. The AC-servo motor, encoder, amplifier, positional controller and network modules are all built into the JVL motor. The only connections required are a supply voltage and the network cables. A double-supply facility is available inorder to ensure that position and parameters are maintained intact for example during an emergency stop. Via CANopen it is possible to access all of the MAC motor's registers.
The CANopen module is supplie with M12 connectors (IP67) with watertight connections for harsh industrial environments.
The JVL MAC00-FC4 expansion module features the following:
- Position, torque, and velocity control.
- 4 I/O for version with M12 connector. 6 inputs and 2 outputs for version with cable glands. All 24V PNP and with opto-couplers.
- I/O can be used for end-of-travel limits and high-speed start/stop.
- Hardware and software adjustment of baud rate and address.
- Galvanically insulated I/O and network connections.
- A selection of standard commands are addressable.
The MAC00-FC4 module for the inegrated servo motors enables the MAC motors to be used on a CANopen or CANbus network.
The CAN module features:
- CANbus/CANopen DS 301 V3.0
- CANopen DSP 402 V2.0
- Baud rates from 10 to 1000kbit