SMC New Products - Fall 2022
Friday, October 14, 2022 1:24:50 PM America/New_York
SMC - New Products Fall 2022
SMC is excited to announce several new products that are being released in the Fall of 2022. Below is an introduction to the new SMC products and some early details about the products.
Zero Rotation Rotary Clamp Cylinder MKB40-X3322
Development background: In the smartphone industry there was a request for a rotary clamp cylinder without a rotation stroke, because installation space was limited with the remodeling of machine tools.
Features:
- The rotation stroke has been eliminated and the height has been reduced by 15mm
- Can be installed in locations with height restrictions
- The rotation direction (left or right) can be selected
High Response & Frequency Cylinder with Solenoid Valve MQMLV10-10D-X117
Features:
- Metal seal piston & Less piping volume = Higher response, energy saving & labor saving
- Super high speed (X117: up to 1000mm/sec)
- Energy Savings
Applications:
Conduction Inspection Process | High-speed rejection application in food industry |
Compact 2-way Solenoid Valve SX21-5G-1-X2
Features:
- Plug-lead connector = Easy maintenance
- Low power consumption: 1.5W
- Oil-free
- Flame resistant: UL94V-0 compliant
Applications:
Blow on precision parts | Soldering Equipment |
Exhaust Flow Control Valve with Indicator AS-DPX00042
Background of AS-DPX00042 Development: Compete with CKD 4GR series
Target Application: Customers which use solenoid valve and require speed adjustments from the valve side and not the cylinder side.
Features:
- Contributes to reduced setting errors and work hours by numerically managing the flow rate (indicator)
- Integrated Restrictor and Silencer
- Reduced assembly time and number of components
- The speed can be adjusted on the valve side (In cases where the cylinder is installed in a high or narrow place
- Operating pressure range: 0 ~ 1MPa
- Connection thread: R1/4
Compact Thermo-Con HEF002
Features:
- Compact
- Cooling capacity: 220W, Temperature range: 1- ~ 60C
- Silent design: 45 dBA (low function mode)
- Refrigerant-free
- Temperature stability +-0.1C
Applications: Cooling of heat sources on optical and analytical equipment
Cooling for Power Device | Cooling Plate |
Water Regulator INA13-956-A/B
Features:
- Large flow rate: 10L/min (c.f. WR110 5L/min)
- Body material: Brass
- Port Size: Rc3/8
- Gauge Port Size: Rc1/4
- Set Press: INA-13-956-A: 0.05~0.2MPa & INA-13-956-B: 0.05~0.7MPa
Applications:
Ultrasonic Cleaning Device | Corrosion Test Equipment |
Electronic Vacuum Regulator ITV2090-31F2L5-X122
Features:
- Expansion of setting range
- Setting range: -4 to -93.3kPa (Standard specifications: -1.3 to -80kPa)
Applications: Vacuum pressure adjustment for the following applications
Cardboard Assembly | Glass Adsorption | Body Adsorption |
Angular Type Electric Gripper LEHY16N-X101
Development Background: Developed after consultation from users who are using IAI electric grippers for measures against malfuctions due to dust from the workpiece
Differentiation Points: Since IAI does not have an air purge port, we have an advantage with countermeasures against foreign matter entering the product.
Features:
- Fulcrum opening/closing type electric chuck
- Prevents dust from entering the product air purging
Applications: Pick and Place
Electric Actuator for Dust Resistant Enviroment LEY*32DNZ-Z1067
Features:
LEY*32-X7 motor less specification with a grease nipple port
- Dust-tight/Water jet proof enclosure (IP65/67 Equivalent)
- Protection against ingresses of solids and water
- Applicable motor (IP67)
- Now has an air purge port
- Prevents dust from entering the finger portion
- Compatible with standard products (MHS3-50D)
Water Resistant Rotary Actuator MSQ20R-DIZ00063
Development Background: There are demands to be water resistant function for the places where water and coolant are used. Especially for a machine tools industry.
- Improved effect of preventing coolant water intrusion
- Low head table matches the application (Compact)
- Table center hole is 12mm, which is larger than the old type 9mm.
Features:
Water resistant (Top and Bottom) based on standard MSQ
MSQ Standard:
- Compact and lightweight
- Enlarged center hole diameter for piping (9mm to 12mm) (Compared with the existing model (MSQ20))
- The adjustable rotation time range is expanded (0.2 to 2.0 s/90 degrees). Can be used at lower speeds compared with the existing model
Contents of special:
- Seal installed between the table and the bearing retainer
- Liquid gasket used for bearing retainer and boss
- Fluoro rubber o-ring
- With cover on the bottom of the body
Blow Gun with Flow Rate Adjustment VMG-X54
Target Application:
- For the blowing of lightweight work pieces
- For the blowing off of water droplets
- For the blowing off of powder
Features:
- The flow rate can be easily adjusted according to the amount of force applied to the lever
- Nozzle type: Low noise nozzle, Male thread nozzle, High efficiency nozzle, Copper extension nozzle
- Connection type: Screw-in type, S coupler plug type, One-touch fitting type
- Piping entry: Bottom
- Weight (Main unit only): 165g
- Flow rate characteristics (With nozzle removed): C(dm3/s bar):6.0
Vacuum Flow/Adjustable Type ZHV10
Development Background Problem: Water droplets freezing on the conveyor causes the conveyor to stop in warehouse freezers.
Features:
- Vacuum flow with flow rate adjustment function
- The suction flow rate, discharge flow rate, and vacuum pressure can be adjusted. Thereby, reducing the air consumption
Applications:
Powder collection in resin parts making system | Blow off machine chips |
Vacuum Pad Suitable for the Adsorption Transfer of Corrugated Cardboard ZP3C
Features:
- Material: FS61 (Fluoro-based rubber)
- Abrasion resistance improvement
- Easier maintenance
- Reduced suction of foreign matter with mesh filter
Applications: For the transfer of corrugated cardboard
Vacuum Operated Cylinder ZU05SA-10M5-Z107
Features:
Cylinder capable of the adsorption, raising, and retaining workpieces with vacuum power
- Rises while adsorbing the workpiece
- Begins to rise before the pad is pressed against the workpiece
- With vacuum pressure detection port
- Available with or without an ejector
Applications: